C 006E

  

Table Top, small, light and sensitive Boundary Layer Condenser Microphone with a Half-Cardioid Polar Pattern.

Black Grey
C 006E C 006EG
3.6mm mono jack plug C 006-JP

Table Top, small, light and sensitive Boundary Layer Condenser Microphone with a Half-Cardioid Polar Pattern.

  • Boundary Layer Condenser Microphone.
  • Half-Cardioid Polar Pattern.
  • Fully balanced Low profile.
  • Includes an in-line Phantom Power Adaptor.
  • Finish: Black or Grey Nextel®.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

C 006E
Application Designed for a wide range of Pro Audio applications including conference, lectern and theatre.
Type Condenser (back electret)
Polar Pattern Half-Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 120dB 1% THD
Power Requirements 9 - 48 volts Phantom Power
Termination TA3F Mini XLR
Finish Black or Grey Nextel®
Dimensions D 42mm (1.65") x W 39mm (1.53") H 17.25mm (0.68")
Weight Net Weight: 0.16kg Shipping Weight: 0.18kg
Architects and engineer specifications The Condenser Microphone is a small, low profile Boundary Layer type, with a Half-Cardioid Polar Pattern. The Microphone includes a 3m (9'.9") of cable and is terminated with a TA3F Mini XLR connector. The Microphone is supplied with a separate in-line Phantom Power Adaptor accepting 9 to 48 volts DC, and contains a switchable 10 dB pad and bass cut filter(-4dB per octave at 400 Hz to –6dB per octave at 100 Hz); Impedance 200 Ohms; Frequency response 50 Hz to 18 KHz; Sensitivity -37.0dB +/- 3dB @ 1Khz (0db =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120db is less than 1%. The Microphone's base is covered with a rubber isolation pad to help minimise the transfer of mechanical noise and vibrations from tables. Finish: Black or Grey Nextel®.
C 006-JP
Application Table Top, small size low profile Boundary Layer type Condenser Microphone for use with the CILP10 Portable Induction Loop System.
Type Condenser (back electret)
Polar Pattern Half-Cardioid
Frequency Response 50 - 18KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 69dB (A)
Maximum Sound Pressure Level 120dB 1% THD
Power Requirements 5 volt DC plug
Termination 3.6mm mono jack plug
Finish Black
Dimensions D 42mm (1.65") x W 39mm (1.53") H 17.25mm (0.68")
Weight Net Weight: 0.14kg Shipping Weight: 0.16kg
Architects and engineer specifications The Condenser Microphone is a small, low profile Boundary Layer type, with a Half-Cardioid Polar Pattern. The Microphone includes a 3m (9'.9") of cable and is terminated with a 3.6mm mono jack plug connector Suitable for use with the CLIP10. The microphone base is covered with a rubber isolation pad to help minimise the transfer of mechanical noise and vibrations from tables. Finish: Black.