b'Clockaudio -Boundary Cardioid Microphones 1715CRM 102-RF C 004E C 012E-RFRetractable through-table half- through-table through-table cardioid condenser microphone boundary microphone boundary microphoneThe CRM102-RF is a boundary layer, through-table, cardioidCardioidboundary layer condenser microphonesThis through-table cardioid microphone was created condenser microphone, with a built-in mechanism that will allow thedesigned for a wide range of installed audio,for applications demanding sonic quality, but also user to make the microphone disappear without having to physicallyconferencing or security applications. requiring an extremely robust housing within an extreme remove it from the table. This is achieved by simply pressing the topenvironment.of the microphone downwards until it locks; then by pressing theEngineered in high quality microphone again it will raise itself back to its original position abovebrassthe surface of the table. Engineered in high quality brass with built-inBalanced output RF-immuneshock mount and RF filter. Simple through-table shockBalanced outputmounting Simple through-table Easy to install Finished in satin black orshock mountingLow profile at surface level matt white Finished in satin black or Unique ability to lock capsule away nickelfrom sight when not in useRobust brass constructionCardioid polar patternBuilt-in RF filterBalanced output Models:Supplied with 2m (6.6 ft) 2 core C 012E-RF Black + screen cableC 012EN-RFNickelSatin Nickel or Black Nextel finishCRMF Straight Cut - see page 14Models: Models:CRM 102-RF C 004E-RF Black C 004EW-RFWhiteModel:CRM 102-RFTypeCondenser (Back Electret)Polar PatternHalf CardioidModel:C 004E-RF Model:C 012E-RFFrequency Response50Hz - 18KHz Polar PatternCardioid Polar PatternCardioidSensitivity-37dB +/- 3dB @ 1KHz (0dB = 1v/Pa) Frequency Response50Hz ~ 18KHz Frequency Response50Hz ~ 18KHzImpedance200W Sensitivity-37dBSensitivity-37dBS/N Ratio69dB(A)3dB at 1KHz (0dB=1v/Pa) 3dB at 1KHz (0dB=1v/Pa)Maximum SPL125db at 1KHz 1% T.H.D.Impedance200W Impedance200WPower Requirements9 ~ 48v Phantom Power Power Requirements9 ~ 48v Phantom Power Power Requirements9 ~ 48v Phantom PowerTerminationOpen ended S/N Ratio69dB(A) S/N Ratio69dB(A)DimensionsAbove Table: 15mm (0.58)TerminationMale 3 pin XLR TerminationMale 3 pin XLRDiameter:36mm (1.42)Below Table: 111mm (4.37) Diameter:30mm (1.18)'