b'36 Clockaudio -Dante and USB InterfaceCDT 100 MK2Dante transporterThe Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality.This product has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any placewhere multiple table microphones and control devices are connected back to the AV equipment cabinet.Easy to install with under table mountingAudio and control signals transported over Dante4 audio inputs, multiple inputs may be daisy chained (maximum of 6 units on a single CAT-5)Provides Phantom Power for each mic input4 control inputs compatible with all Clockaudio devices including: - direct connection to TS-005 switch and LED, TS003, Retracta CRM202S-RF, CS-S Series, SM80S, S80S- direct connection to ARM-C controllerOpen API for interfacing with Control SystemsCompatible with any Dante capable audio DSP used in combination with a Crestron or AMX Controller*Easy use with mono or stereo inputsDual mono or stereo outputsPower supply for the CDT-100 is sold separatelyModel:CDT 100Input typeBalanced and RF filteredModels:Gain0dB CDT 100-UDP Mk2 Input impedance1.8K ohmsFor Crestron/AMX logic control users onlyPhantom Power+48V, software selectable CDT 100-ConMon Mk2 EIN-115dBu For Symetrix Logic control users onlySystem THD+N0.01% at any gain, input signal 3dB below maximum*The CDT100-UDP requires a Crestron or AMX control system for logic Physical levelStandard Ethernet and Phantom Power activation.ConnectorSingle RJ-45Dante compatible Symetrix DSP requires CDT100-ConMon for logic control Cable QualityCAT5 and Phantom Power activation unless used in combination with a Crestron Transmission speed100 Mbps or AMX control system= RF-Immunity Version'