b'Clockaudio -Automatic Microphone Mixers 55MR 88digital automatic microphone mixerThe MR 88 Digital Automatic Microphone Mixer incorporates advanced DSP technology. It has been carefully designed to give outstanding performance and flexibility whilst maintaining simplicity of set-up and use. Eight input channels, fully adjustable for microphone and line level, can be output from either or both of the two channels. The MR88 incorporates advanced DSP technology and has been carefully designed to give outstanding performance and flexibility whilst maintaining simplicity of set up and use. It provides eight input channels, fully adjustable for microphone or line levels, and two output channels. Flexible routing gives easy use of mono or stereo sources. Each input channel can be assigned to a four-level priority system. The MR-88 provides full set-up and control of the mixer via a user-friendly LCD interface on the front panel, allowing the mixer settings to be selected and adjusted without the need to remove the case covers. Mixers may be linked together to make a large multi-source system with priority and NOMA information extending throughout. All settings are retained, even when the mixer is disconnected from the power supply.Easy set up with LCD display of all functions and settings from front panel and by PC through RS232 socketFast, silent automatic microphone selection8 Channel mic/line inputs on XLR connectorsRecord outputs for each input channel2 Channel mic/line outputs on XLR connectorsOutput level LED meter2 Band equalisation on each input channel compressionMulti-level channel priority system Model:MR 88Easy use with mono or stereo inputs Input Impedance2.4KW differential Dual mono or stereo outputs Output ImpedanceBalanced:50W Security mode Pre-Amp Out:560WAdjustable limiters on each input prevent channel overloads Max Input LevelMic Level:-23dBv Adjustable off attenuation of each input channel Line Level:+16dBv Channel LEDs indicate active or locked out channels Max Output Level+19dBv Nominal Output Level at 0dBv on MeterPre-Amp Out:-10dBv Select NOMA operation on/off Balanced:-60dBv ~ +4dBvSimple daisy-chain set up for multiple microphone operations Frequency Response20Hz ~ 20KHz 48v Phantom Power individually selectable for each channel THD+N-70dB Remote VCA control and RS232 Max Noma Attenuation20dB External TTL control and monitoring of channel selection Phantom Power+48v 1U rack-mountingPower Supply15v DCOperating Temperature0 ~ 40C'