b'Clockaudio -Ceiling and Suspended 33C 303-RF C 007E Series SEC 07Designed for security and surveillance tri-element suspendedButton boundary microphone applications. Offering easy mounting to walls microphone array Omni-directional, boundary layer condenser microphones suitable foror ceilings the SEC 07 has the appearance of surveillance and recording in sensitive areas such as banks, airports,an ordinary fire detector. Electronics housed Tri-element array hanging microphonerailway stations, law courts, conference and convention centres. Very lowwithin the SEC 07 offer screw terminals, designed for unobtrusive all round highprofile and easily mounted with M12 x 1 nut and washer supplied. eliminating the need for connectors .quality pickup necessary in places such as boardrooms, conferencing, court rooms and other venues. Non-reflective Delrin with non-conductive body (Non-RF only) Omni-directional3 colour options (Black, White & Nickel) Built-in line level pre-ampResponse optimised for consistent soundRF & Non-RF versions available Selectable sensitivity switching quality Water resistant option (Non-RF only) 9-48V Phantom power switchableMade in high quality brass and finished Bi-colour LED Red or Green (RF Version only) for 12-24V dc operationin satin black or white with 7.5m of Pick up range of 15m (50ft)cable attachedRed LED status indicatorsRJ-45 termination,Sturdy ABS housingphantom power adaptor requiredEasy to install Universal mounting to electrical conduit boxesModels:C 303-RFBlack C 303W-RFWhiteModels:C 007 C 007E C 007E-RF C 007E-LED-RFModel:C 007C 007EC 007E-RFModel:C 303-RF Frequency Response50Hz ~ 20KHz50Hz ~ 20KHz50Hz ~ 20KHz Model:SEC 07TypeCondenser Sensitivity-42.5dB 2dB at 1KHz (0dB=1v/Pa) Frequency response50Hz ~ 12KHzPolar PatternCardioid Impedance1KW 200W200W Impedance75WFrequency Response50Hz ~ 18KHz Power Requirements2 ~ 10v max through 9 ~ 48v Phantom Power9 ~ 48v Phantom PowerSensitivity-42.5.5dB +/- 3dBSensitivity-37dB 3dB @ 1KHz (0dB=1v/Pa) series resistor(12v DC required @ 1 KHz (0dB = 1 V/Pa)Impedance200W for LED version) Current Consumption40mA S/N ratio69dB(A) Switchable Bass Filter-4 -DimensionsHeight:45 mm& -10dB Switchable PadPower Requirements9 ~ 48v Phantom Power S/N Ratio40dB(A)40dB(A)40dB(A) Diameter:100 mmTerminationRJ-45 to Phoenix Weight: 126gTerminationOpen-endedMale 3 pin XLRMale 3 pin XLR with PPA-RF'