b'Clockaudio -Dante and USB Interface 37CUI-2The Clockaudios USB Interface (CUI-2) enables virtually any of the Clockaudios microphones to be used as a solution to meet the needs of a remote worker. Providing input for up to two microphones, excellent built-in pre-amp, RGB LED Switch buttons and together with a host of setup features, it is well positioned to deliver the highest level of audio.CUI-2 is ideally suited for any application where the user can only connect a mic via a USB interface e.g. a laptop, desk computer, tablet. Whether you are a day-trader, yoga instructor, podcaster, gamer, or a business professional trying to conduct business, the CUI-2 enables provision of proper audio quality when working remotely.USB Stereo Microphone Preamp InterfaceUSB Bus Powered, 24-bit/48kHz, Plug-and-Play driverless with PC, MAC & othersEasy to install and mounts under desk or table with two screwsLow noise design, optimised for Clockaudio microphones10-50dB Gain Control48V Phantom PowerTouch switch port for use with Clockaudio capacitive touch switchesLED brightness controlRGB colour selection for Mute and UnmuteLatching Mute and Push to Mute ModesVU Metering for microphone Gain setup via TS buttonsDemo Mode plays audio Test Tone to USB input and RGB colour showCompact aluminium enclosure with flange mountsTamper resistant front cover includedOptional 12V external supplyModel: CUI-2Audio Specifications Input type Balanced and RF filteredGain Variable, 10-50dBInput Impedance 2.5K ohmsPhantom Power 48V, always onSystem THD+N 0.01% at any gain, input signal 3dB below maximumFrequency Response 20Hz - 20kHz, +/- 1dB @ 40dB GainGeneral Specifications TS Control Device Input RJ45, interfaces with Clockaudio TS-C1 and Clockaudio Touch SwitchesPower Consumption (USB type B) 2WMax Product Dimensions 129mm (5.07) x 85mm (3.35) x 37mm (1.44)Unit Weight 227g (0.5 lbs)Packaged Weight 363g (0.8 lbs)'