b'Clockaudio -Boundary Accessories and switches 27SWP2Through table microphone mount made from solid brass with electronic touch switch and RGB LED to give clear precise visual status of operation. Touch switch has no moving parts and the electronic circuitry is encapsulated to prevent liquids or other contaminants affecting its operation. Used in conjunction with DSP units and other electronic mute switching boxes to facilitate soft PTT, PTM and Latching Switching.Requiring 12vDC power.Easy to install.Low profile at surface level.Cutouts to support ARMF and CRMF.Switch plate integrated with the low profile TS 006 capacitive touch switch.TS 006 is self-calibrating and provides a RGB LED that can produce multi-colour combination for clear precise visual status of microphone or other devices.Terminated with RJ45 connector and suppliedwith a touch switch controller (TS-C1) allows connection via CAT 5E patch cable back to CDT-100 or directly to DSP.Finish: Black Nextel or Satin Nickel.Also available in Nextel Suede Coating finishes(Custom Orders Only)Models:SWP2BlackSWP2NNickelModel: SWP2Power Requirements 12vDC @ 70mATermination RJ45 Plug Pins 1-7 usedSupplied Accessories TS-C1Finish Black Nextel or Satin NickelWeight 160gDimensions Lenght: 92mm (3.6)Width: 64mm (2.5)Height: 2.60mm (0.1)'