b'28 Clockaudio -Boundary Accessories ARM-CARM-PSU 4 CAP 002digital four channel power supply line level motor control box ARM-PSU 4 is a switched mode power supplypre-amplifierDigital four channel motor Control Box for usecapable of delivering regulated 12vDC @ 5 Amps.The CAP 002 is a line level pre-with the ARM series of motorised through deskFor use with 4 X ARM-C Control Box. May be usedamplifier fitted in a robust plastic Boundary microphones. on mains supplies from 100~230vAC. Mains cablecase.is detachable IEC design.Power LED indicator Blue. For use with the ARM-C Control Box Can be powered with a simplePorts: 2 x RJ12 for DSP and Linking to another Power supply is capable of delivering 12 / 24v DC adaptor or 24v AC from aARM-C control box.regulated 12vDC @ 5 Amps. cameraLogic input port will simultaneously raise / lower For use with up to 4 X ARM C Control Boxes. Ideal for situations where the all ARM microphones. microphone needs to be sent directlyPowered by ARM-PSU 4, an external 12vDC switchedCan be used on mains supplies from 100~230vAC. to a camera or DVRmode Power Supply. Mains cable is detachable IEC design. Also very useful when microphoneDC connections to the box are via a 2 terminal level input is not available removable Phoenix connector. Models: Uses barrier strips for quickAll microphones and controller boxes are ARM-PSU 4 termination preset / calibrated at the factory.Capable of operating up to 4 ARM microphones.Models:ARM-CModel: ARM-PSU 4 Models:Weight 0.32KgsFinish Black CAP 002Model: ARM-CDimension Length: 120mmWeight 0.2Kgs Width: 58mm Model: CAP 002Finish Black Height: 35mm Frequency response80 - 20KHz Dimension Length: 85mm Impedance 220WWidth: 198mm Power requirements 12 /24v DCHeight: 42mmFinish Satin Black'