Desk / Table top Cardioid Boundary Layer electret Condenser Microphone with fully programmable touch pad for PTT PTM & Latching modes.
- Immune to RF artefacts.
- Cardioid Polar Pattern.
- Optimised for speech clarity.
- Programmable touch pad switching.
- Unobtrusive design.
- Built in Phantom Power Module.
- Finish: Satin Black.
- Also available in Nextel Suede Coating finishes (Custom Orders Only)
For 'Glossary of Terms' Click Here
Technical |
Application |
The desk mount Boundary Layer Microphone is designed for speech applications where simple and rapid connection to an external Microphone mixer / amplifier is required. |
Type |
Condenser (back electret) |
Polar Pattern |
Cardioid |
Frequency Response |
50 Hz - 18 KHz |
Sensitivity |
-37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa) |
Impedance |
200 Ohms |
S/N Ratio |
69dB (A) |
Maximum Sound Pressure Level |
120dB 1% THD |
Power Requirements |
9 - 48 volts Phantom Power |
Termination |
5 Pin XLR with remote switch ability |
Finish |
Satin Black |
Dimensions |
W 100mm (3.94") H 30mm (1.18") L 120mm (4.8") |
Weight |
Net Weight: 0.74kg
Shipping Weight: 0.84kg |
Architects and engineer specifications |
Desk / Table top Cardioid Boundary Layer electret Condenser Microphone with fully programmable touch pad for PTT PTM & Latching modes. Red led shows when Microphone is live. Built in Phantom Power which requires power from an external 48 Volt Phantom supply. A 5 pin male socket mounted on the rear of the product is provided for output connection. Fully protected against RF interference which will eliminate all GSM frequencies from 800-1200 MHz. Frequency response 50Hz-18KHz, sensitivity -37dB+/- 3dB @ 1KHz (0dB = 1VPa), Max spl 120 less than 1% THD, S/N 64dB, impedance 200 Ohms. Finish: Satin Black |