Suspended mini Shotgun Microphone with Hyper Cardioid capsule.
- Response optimised for consistent sound quality.
- Unobtrusive slimline design.
- Superior grade components.
- Engineered in high quality brass.
- Fully flexible Gooseneck shaft with knuckle joint.
- Includes PPA-RF.
- Finish: Satin Black or White.
- Also available in Nextel Suede Coating finishes (Custom Orders Only)
For 'Glossary of Terms' Click Here
| C 8SE-RF |
| Length | Short flexible shaft |
| Application | Designed for ceiling mounting for use in conference halls, places of worship, board rooms.. |
| Type | Condenser (back electret) |
| Polar Pattern | Hyper Cardioid |
| Frequency Response | 50 Hz - 18 KHz |
| Sensitivity | -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa) |
| Impedance | 200 Ohms |
| S/N Ratio | 69dB (A) |
| Maximum Sound Pressure Level | 125dB 1% THD |
| Power Requirements | 9 - 48 volts phantom power |
| Termination | Male 3 Pin XLR |
| Supplied Accessories | W2 Foam windshield included |
| Finish | Satin Black or White. |
| Dimensions | 12mm (0.5") |
| Architects and engineer specifications | The Electret condenser gooseneck microphone is a mini shotgun Hyper cardioid polar pattern with a slimline profile. The microphone is constructed from high quality brass construction using a short flexible shaft ( 6mm diameter) with a knuckle joint allowing vertical adjustment. The microphone is fitted with an external phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The Phantom Power Adaptor includes filters which will eliminate all cellular frequencies (GSM/2G, 3G, 4G & 5G). A 25ft (7.5Metre) cable is connected and is terminated with a male 3 pin XLR. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Ceiling plate CP73 is available as an optional extra. Microphone length: 8.5in/215mm. Shaft diameter: 7mm. Finish: Satin Black or White. |
| C 8S-RF (CPPW01-RF) |
| Length | Short flexible shaft. |
| Application | Designed for ceiling mounting for use in conference halls, places of worship, board rooms ect... |
| Type | Condenser (back electret). |
| Polar Pattern | Hyper Cardioid |
| Frequency Response | 50 Hz - 18 KHz. |
| Sensitivity | -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). |
| Impedance | 200 Ohms. |
| S/N Ratio | 69dB (A). |
| Maximum Sound Pressure Level | 125dB 1% THD. |
| Power Requirements | 9 - 48 volts phantom power. |
| Termination | (CPPW01-RF) Screw terminals to Open Ended 2 core + Screen. |
| Supplied Accessories | W8 Foam windshield included. |
| Finish | Satin Black or White. |
| Dimensions | 12mm (0.5"). |
| Architects and engineer specifications | The Electret condenser gooseneck microphone is a mini shotgun Hyper cardioid polar pattern with a slimline profile. The microphone is constructed from high quality brass construction using a short flexible shaft ( 6mm diameter) with a knuckle joint allowing vertical adjustment. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Microphone length: 8.5in/215mm. Shaft diameter: 7mm. Finish: Satin Black or White. |
| C 8S |
| Application | Mini shotgun hypercardioid condenser microphone designed to be suspended in places of worship, conference halls, theatres etc. |
| Type | Condenser (back electret) |
| Polar Pattern | Hyper Cardioid |
| Frequency Response | 50Hz - 18 KHz |
| Sensitivity | -37dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa) |
| Impedance | 1.8 K Ohms |
| S/N Ratio | 69dB(A) |
| Maximum Sound Pressure Level | 125db at 1KHz 1% T.H.D. |
| Power Requirements | 1.5-9 volts max through series resistor |
| Termination | Open ended 2 core + screen, Requires PPA or Line Level Pre-Amp. |
| Supplied Accessories | W8 foam windshield included |
| Finish | Satin Black or White. |
| Dimensions | 12mm (0.5") Head, 6mm (0.25" ) Flexible shaft |
| Weight | 7.6/8.9oz |
| Architects and engineer specifications | The back electret condenser hanging mini shotgun microphone has a hypercardioid polar pattern. It is made of robust high quality brass construction and is a slimline design. It contains a miniature flexible gooseneck and knuckle joint configuration which will allow the microphones head to rotate almost 90 degrees vertically to facilitate optimum positioning. The microphone has a combined suspension and signal cable length of 25ft (7.5 metres). The microphone requires a Phantom Power Adaptor or Line Level Pre-Amp accepting 1.5-9 volts DC, The microphone is terminated in bare wires The microphone Frequency response 50 Hz to 18 KHz; Impedance 1.8 K Ohms; Sensitivity -37dB +/- 3dB @ 1Khz (0dB=1V/Pa); Total Harmonic Distortion (THD) at an operating level of 125dB is no greater than 1%. A W8 windshield is supplied. Finish: Satin Black or White. |