CW 9000R |
Frequncy Preparation |
PLL Synthesized Control |
REMOSET |
Radio Frequency |
Frequency Range |
502-960MHz |
S/N Ratio |
> 105db |
Total disttortion rate |
75MHz Wideband |
THD |
< 0.6%@1KHz |
Function display method |
LCD and LED |
Function display content |
Channel, Group, Antenna A/B, Mute, AF/RF, Low battery, Device ID |
Control method |
ON/OFF, Frequency (up/down), Available frequency scan, Volume, Jog dail, ID paring, REMOSET, Squelch level |
Audio output level |
-12dB |
Audio output impedance |
600Ω |
Mute method |
Pilot tone and noise mute |
Output type |
1 balanced XLR connector |
Sensitivity |
1 balanced ø6.3mm connector |
Dimensions |
W 212mm (8.35") H 44mm (1.73") L 214mm (8.43") |
CW 9006T |
Frequency Range |
500-900MHz (According to local regulation) |
Channel Frequencies |
192 PLL selectable channels per frequency band |
RF Output |
10mw |
Frequency Stability |
+- 0.005% |
Frequency Deviation |
+- 48KHz |
S/N Ratio |
> 102db |
Audio Frequency Response |
50Hz - 15KHz |
Dynamic Range |
> +110dB |
Controls |
Power On/Off, Frequency and AF level set |
LCD Information |
Frequency and battery status |
Switching |
Programmable touch switch and LED indicator |
Power Supply |
2 x AA batteries giving more then 9 hours use |
Output |
24 Volts Phantom Power |
Termination |
3 Pin XLR connection |
Finish |
Black patterned. |
Dimensions |
L 125mm (4.93") x W 115mm )4.53") x (D) 40mm (1.58") |
Weight |
394g (13oz) |
Accessories |
Floor stand (S 210X) |