CS-S SERIES

  

The Consultant Boundary Series with inbuilt electronic touch sensitive switch. Developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation.

Black Nickel
1 element CS 1S-RF CS 1SN-RF
2 element CS 2S-RF CS 2SN-RF
3 element CS 3S-RF CS 3SN-RF
4 element CS 4S-RF CS 4SN-RF

The Consultant Boundary Series with inbuilt electronic touch sensitive switch. Developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation.

  • Immune to RF artefacts.
  • Boundary Layer single element Condenser Microphone.
  • Half cardioid Polar Pattern.
  • In built electronic touch switch with Red / Green LED Halo ring.
  • Fully balanced.
  • Engineered in high quality brass.
  • Inbuilt Phantom Power Adaptor.
  • Touch switch requires connection to a DSP or LB001 mute control box.
  • Terminated with RJ 45 for switching.
  • Finish: Black Nextel® or Satin Nickel.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

CS1S-RF
Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module.
Type Condenser (back electret).
Polar Pattern Half Cardioid.
Frequency Response 50 Hz - 18 KHz.
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa).
Impedance 200 Ohms.
S/N Ratio 69dB (A).
Maximum Sound Pressure Level 120dB 1% THD.
Power Requirements 9 - 48 volts Phantom Power.
Termination Open ended for audio RJ 45 for switching.
Finish Black Nextel® or Satin Nickel.
Dimensions 44mm (1.7") x 22mm (.87")
Architects and engineer specifications The Condenser Microphone is a single element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive switch with Red / Green LED Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to LB001 touch control box or an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut.. The Microphone is fitted with a 6.6 ft (2 Metres) 2 core + ground cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18KHz; Sensitivity –37dB +/- 3 dB @ 1KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
CS2S-RF
Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module.
Type Condenser (back electret).
Polar Pattern Half Cardioid.
Frequency Response 50 Hz - 18 KHz.
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa).
Impedance 200 Ohms.
S/N Ratio 69dB (A).
Maximum Sound Pressure Level 120dB 1% THD.
Power Requirements 9 - 48 volts Phantom Power.
Termination Open ended for audio RJ 45 for switching.
Finish Black Nextel® or Satin Nickel.
Dimensions 104mm (4.1") x 44mm (1.7") x 22mm (.87").
Weight 584gms (20.6 oz).
Architects and engineer specifications The Condenser Microphone is a dual element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive switch with Red / Green led halo is inbuilt allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to LB001 touch control box or an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6 ft (2 Metres) 4 core + ground cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18KHz; Sensitivity –37dB +/- 3 dB @ 1KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
CS3S-RF
Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module.
Type Condenser (back electret).
Polar Pattern Half Cardioid.
Frequency Response 50 Hz - 18 KHz.
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa).
Impedance 200 Ohms.
S/N Ratio 69dB (A).
Maximum Sound Pressure Level 120dB 1% THD.
Power Requirements 9 - 48 volts Phantom Power.
Termination Open Ended for audio RJ 45 for switching.
Finish Black Nextel® or Satin Nickel.
Dimensions 104mm (4.1") x 44mm (1.7") x 22mm (.87").
Weight 584g (20.6oz).
Architects and engineer specifications The Condenser Microphone is a triple element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive switch with Red / Green LED Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to LB001 touch control box or an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6 ft (2 Metres) 6 core + ground cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18KHz; Sensitivity –37dB +/- 3 dB @ 1KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
CS4S-RF
Length 103mm (4.1").
Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser elements. Inbuilt Phantom Power Adaptor.
Type Condenser (back electret).
Polar Pattern Half Cardioid.
Frequency Response 50 Hz - 18 KHz.
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa).
Impedance 200 Ohms.
S/N Ratio 69dB (A).
Maximum Sound Pressure Level 120dB 1% THD.
Power Requirements 9 - 48 volts Phantom Power.
Termination Open Ended for audio RJ 45 for switching.
Finish Black Nextel® or Satin Nickel.
Dimensions 103mm (4.1") x 103mm (4.1") x 22mm (.87").
Weight 910g (32.2oz).
Architects and engineer specifications The Condenser Microphone is a quad element Boundary Layer type with a Half Cardioid Polar Pattern. An inbuilt touch sensitive switch with Red / Green LED Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to LB001 touch control box or an external DSP. The Microphone is made from solid brass and is permanently mounted with use of an M 20 x 1 hollow bolt and nut. The Microphone is fitted with a 6.6 ft (2 metre) cable with Open Ended termination. Also included are four integral Phantom Power Adaptors that accepts 9 to 48 volts DC. The Phantom Power Adaptor also include filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18KHz; Sensitivity –37dB +/- 3 dB @ 1KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB is no greater than 1 %. Finish: Black Nextel® or Satin Nickel.