Master Unit
CCRM4000-M (Black) / CCRM4000W-M (White)
The CCRM4000-M is supplied complete with (1) Ceiling mounted IR sensor, (1) Remote Control, (1) C3 Cardioid Microphone with knuckle joint and magnet, (1) Ceiling bezel with Locking ring and jockey wheel, (1) 18VDC Power supply unit, (1) Ceiling tile mounting bracket and Safety cable.

Slave Unit
CCRM4000-SL (Black) / CCRM4000W-SL (White)
The CCRM4000-SL is supplied complete with (1) C3 Cardioid Microphone with knuckle joint and magnet, (1) Ceiling bezel with Locking ring and jockey wheel, (1) Ceiling tile mounting bracket and Safety cable.

Please note the only difference between the Master and Slave unit is that the Master is supplied with the IR remote, IR sensor and PS-018. The Slave does not.

PS-018
When using more than 4 units in daisy chain, an additional PS-018 will be required.

i.e. An installation using 9 units in total (1 Master and 8 Slaves) would require 2 additional PS-018.

Best New Meeting Room Audio Product : Clockaudio CCRM4000 - INFOCOMM 2015

  • Control ports allow DSP connection and Link / daisy chain expansion to other CCRM 4000 Retracta units.
  • Logic Hi / Lo for DSP mute detection port.
  • Master & Slave units are Identical in construction. Two rotary 0-9 digital decimal encoders are used to set Master (00) and 01 – 99 determines slave designation. The factory default is set to Master (00).
  • XLR socket allows easy and fast connection of the audio to mixer or DSP. A 9-48 Volt phantom power is required.
  • IR remote control is supplied with the master unit. Remote control can be used to activate the units in the absence of a DSP.
  • IR receiver sensor with integral green programme mode led and red range led (supplied with master unit).
  • Audio cable length 2.5 Metres.
  • Supplied with 350 degree rotation, 40 degree knuckle joint angle microphone with cardioid polar pattern.
  • Up to 99 slave units can be daisy chained to the master.
  • Ceiling bezel fitted with detection switch.
  • Universal mains switched mode power supply available as separate item. Operates up to 4 units.
  • Automatic safety detection for cable hang-ups
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

Technical
Cable length 2.5 Metres (8.20ft)
Application Designed for use in boardrooms, conferencing and a wide variety of applications.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -40dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements for microphone 9 -48 Volts Phantom Power
Power requirements for CCRM4000 unit 18VDC 0.5A
Termination C3SW Knuckle Joint microphone pre wired in CCRM4000 unit
Supplied Accessories W2 Windshield included
Finish CCRM4000 motor (Satin Black), C3SW Knuckle Joint microphone and cable (Satin Black or White)
Weight 2.7Kg (5.95lb) (6Kgs) (13.22lb) with bracket
Architects and engineer specifications Ceiling mounted retractable back electret condenser microphone designed for suspended ceiling applications. 2.5 Metres (8.20 ft) cable with pre-wired C3SW microphone, and built in Phantom Power Adaptor. Also includes ceiling tile bridge.The microphone has a knuckle which allows for easy vertical adjustment. Engineered in high quality brass. The microphone requires phantom power supply 9-48 Volts. Frequency response 50 – 18 KHz, impedance 1.8 K Ohms, Max spl 125dB less than 1% THD, sensitivity-40dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa) Finish: Satin Black or White.