The Consultant Boundary Series with inbuilt electronic touch sensitive switch. Developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation.
- Immune to RF artefacts.
- Half cardioid Polar Pattern.
- Inbuilt electronic capacitive touch switch with RGB Halo ring.
- Fully balanced.
- Engineered in high quality brass.
- Inbuilt Phantom Power Adaptor.
- Terminated with RJ 45 via TS-C1 for switching.
- Finish: Black Nextel® or Satin Nickel.
- Also available in Nextel Suede Coating finishes (Custom Orders Only)
For 'Glossary of Terms' Click Here
| CS1S-RF RGB |
| Application |
Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module. |
| Type |
Condenser (back electret). |
| Polar Pattern |
Half Cardioid. |
| Frequency Response |
50 Hz - 18 KHz. |
| Sensitivity |
-37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). |
| Impedance |
200 Ohms. |
| S/N Ratio |
69dB (A). |
| Maximum Sound Pressure Level |
120dB 1% THD. |
| Power Requirements |
9 - 48 volts Phantom Power. |
| Termination |
Open ended for audio. RJ 45 via TS-C1 for switching. |
| Finish |
Black Nextel® or Satin Nickel. |
| Dimensions |
44mm (1.7") x 22mm (.87") |
| Weight
|
452g (16oz)
|
| Supplied Accessories
|
TS-C1
|
| Architects and engineer specifications |
The Condenser Microphone is a single element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive capacitive switch with RGB Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to TS-C1 then to an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6ft (2 Metres) cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18 KHz; Sensitivity –37dB +/- 3 dB @ 1 KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
|
| CS2S-RF RGB |
| Application |
Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module. |
| Type |
Condenser (back electret). |
| Polar Pattern |
Half Cardioid. |
| Frequency Response |
50 Hz - 18 KHz. |
| Sensitivity |
-37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). |
| Impedance |
200 Ohms. |
| S/N Ratio |
69dB (A). |
| Maximum Sound Pressure Level |
120dB 1% THD. |
| Power Requirements |
9 - 48 volts Phantom Power. |
| Termination |
Open ended for audio. RJ 45 via TS-C1 for switching.
|
| Finish |
Black Nextel® or Satin Nickel. |
| Dimensions |
104mm (4.1") x 44mm (1.7") x 22mm (.87"). |
| Weight |
584gms (20.6 oz). |
| Supplied Accessories |
TS-C1
|
| Architects and engineer specifications |
The Condenser Microphone is a dual element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive capacitive switch with RGB Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to TS-C1 then to an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6ft (2 Metres) cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18 KHz; Sensitivity –37dB +/- 3 dB @ 1 KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
|
| CS3S-RF RGB |
| Application |
Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module. |
| Type |
Condenser (back electret). |
| Polar Pattern |
Half Cardioid. |
| Frequency Response |
50 Hz - 18 KHz. |
| Sensitivity |
-37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). |
| Impedance |
200 Ohms. |
| S/N Ratio |
69dB (A). |
| Maximum Sound Pressure Level |
120dB 1% THD. |
| Power Requirements |
9 - 48 volts Phantom Power. |
| Termination |
Open ended for audio. RJ 45 via TS-C1 for switching.
|
| Finish |
Black Nextel® or Satin Nickel. |
| Dimensions |
104mm (4.1") x 44mm (1.7") x 22mm (.87"). |
| Weight |
584g (20.6oz). |
| Supplied Accessories
|
TS-C1
|
| Architects and engineer specifications |
The Condenser Microphone is a triple element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive capacitive switch with RGB Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to TS-C1 then to an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6ft (2 Metres) cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18 KHz; Sensitivity –37dB +/- 3 dB @ 1 KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
|
| CS4S-RF RGB |
| Application |
Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser elements. Inbuilt Phantom Power Adaptor. |
| Type |
Condenser (back electret). |
| Polar Pattern |
Half Cardioid. |
| Frequency Response |
50 Hz - 18 KHz. |
| Sensitivity |
-37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). |
| Impedance |
200 Ohms. |
| S/N Ratio |
69dB (A). |
| Maximum Sound Pressure Level |
120dB 1% THD. |
| Power Requirements |
9 - 48 volts Phantom Power. |
| Termination |
Open ended for audio. RJ 45 via TS-C1 for switching.
|
| Finish |
Black Nextel® or Satin Nickel. |
| Dimensions |
103mm (4.1") x 103mm (4.1") x 22mm (.87"). |
| Weight |
910g (32.2oz). |
| Supplied Accessories
|
TS-C1
|
| Architects and engineer specifications |
The Condenser Microphone is a quad element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive capacitive switch with RGB Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to TS-C1 then to an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6ft (2 Metres) cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18 KHz; Sensitivity –37dB +/- 3 dB @ 1 KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.
|