C 002E-RF

  

Electret Condenser Microphone is a very low profile Boundary Layer Microphone with an Omni-Directional Polar Pattern.

Polar Pattern Frequency Response
C 002EG-RF
Black Grey
C 002E-RF C 002EG-RF

Electret Condenser Microphone is a very low profile Boundary Layer Microphone with an Omni-Directional Polar Pattern.

  • Boundary Layer Condenser Microphone.
  • RF friendily technology offering immunity from GSM (cellphones) and other sources of frequency interference.
  • Omni-Directional Polar Pattern.
  • Wide range smooth response.
  • Very low profile.
  • Supplied with a separate in-line Phantom Power Adaptor.
  • Finish: Black Nextel® or Grey Nextel®.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

Technical
Application Ideal for mounting on walls, floors, pianos, etc. A smooth response with hemispherical Polar Pattern providing natural sound with a good sense of depth for optimum bass.
Type Condenser (back electret)
Polar Pattern Omni-Directional
Frequency Response 50 Hz - 18 KHz
Sensitivity -47dB +/- 3dB at 1 KHz (OdB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB(A)
Maximum Sound Pressure Level 120db at 1KHz 1% T.H.D.
Power Requirements 9 - 48 volts Phantom Power Adaptor
Termination Male 3 Pin XLR
Finish Non-reflective Black Nextel® or Grey Nextel®.
Cable 3m (9'.9")
Dimensions D 75mm (2.95") x H12.5mm (0.492") with rubber feet
Weight Net Weight: 0.40Kg Shipping Weight: 0.42Kg
Architects and engineer specifications The Electret Condenser Microphone is a very low profile Boundary Layer Microphone with an Omni-Directional Polar Pattern. The microphone is constructed of brass and includes 9.9 ft (3 Metres) of screened cable. The Microphone includes a separate inline Phantom Power Adaptor which is to be powered by 9 to 48 volts. The in-line adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Impedance 200 Ohms @ 1KHz, frequency response 50 Hz to 18 KHz +/-3dB, sensitivity -47dB +/- 3dB @ 1Khz (0dB =1V/Pa), total Harmonic Distortion (THD) at an operating level of 120dB less than 1%. The Microphone includes 4 small rubber isolation feet to help minimise the transfer of mechanical noise and vibrations from the table. The Microphone has a non-reflective Black Nextel® or Grey Nextel® finish.