C 007-RF-SERIES

  

Through desk/ceiling/panel mount Boundary Layer design with an Omni-Directional Polar Pattern.

Polar Pattern Frequency Response
C 007W-RF C 007N-RF
C 007EW-RF C 007EN-RF
Open Ended / CPPW01-RF XLR-RF
C 007-RF C 007E-RF
C 007W-RF C 007EW-RF
C 007N-RF C 007EN-RF

Through desk/ceiling/panel mount Boundary Layer design with an Omni-Directional Polar Pattern.

  • Boundary Layer Condenser microphone.
  • RF friendily technology offering immunity from GSM (cellphones) and other sources of frequency interference.
  • Omni-Directional.
  • High quality brass construction.
  • Ease of mounting.
  • Low visibility when mounted.
  • Screw terminal termination supplied with an Open Ended cable.
  • Supplied with CPPW01-RF or PPA-RF.
  • Finish: Matt Black, White or Nickel.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

C 007-RF
Length 25mm (1.0")
Application Designed for surveillance in sensitive areas - banks, airports, railway stations, law courts, conference and convention centres.
Type Condenser (back electret)
Polar Pattern Omnidirectional
Frequency Response 50 Hz - 18 KHz
Sensitivity -37.5dB +/- 3dB at 1 KHz (OdB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 68dB(A)
Maximum Sound Pressure Level 120db at 1KHz 1% T.H.D.
Power Requirements 9 - 48 volts phantom power
Termination CPPW 01-RF (Screw terminals)
Finish Matt Black, White or Nickel.
Dimensions DIA 20mm (0.8")
Architects and engineer specifications The condenser microphone is a through desk/ceiling/panel mount boundary layer design with an omni-directional polar pattern. The microphone is made of a brass construction and is prewired with 39”(1 metre) of cable with open ended termination. The microphone includes a separate in line Phantom Power Adaptor (CPPW 01-RF) which accepts 9 to 48 volts DC. The phantom power adaptor includes filters which will eliminate all GSM frequencies from 800-1200MHz. Frequency response 50 Hz to 18 KHz; Impedance 200 Ohms; Sensitivity -37.5dB +/- 3dB @ 1Khz (0dB =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%. Finish: Matt Black, White or Nickel.
C 007E-RF
Length 25mm (1.0")
Application Designed for surveillance in sensitive areas - banks, airports, railway stations, law courts, conference and convention centres.
Type Condenser (back electret)
Polar Pattern Omni-Directional
Frequency Response 50 Hz - 20 KHz
Sensitivity -37.5dB +/- 3dB at 1 KHz (OdB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 68dB(A)
Maximum Sound Pressure Level 120db at 1KHz 1% T.H.D.
Power Requirements 9-48 volts phantom power
Termination PPA-RF (Male 3 Pin XLR)
Finish Matt Black, White or Nickel.
Dimensions DIA 20mm (0.8")
Architects and engineer specifications The condenser microphone is a through desk/ceiling/panel mount boundary layer design with an omni-directional polar pattern.The microphone is fitted with an external phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. The microphone is made of a brass construction and includes 39”(1 metre) of cable which is terminated with a PPA-RF (Male 3 Pin XLR). Frequency response 50 Hz to 20 KHz; Impedance 200 Ohms; Sensitivity -37.5dB +/- 3dB at 1 KHz (OdB = 1 V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%. Finish: Matt Black, White or Nickel.