C 3SE-RF-SERIES

  

Suspended Semi-Rigid Gooseneck Cardioid Condenser Microphone with short flexible shaft and knuckle joint.

Polar Pattern Frequency Response
C 3SEW-RF C 3SW-RF
C 3SW
Termination XLR/PPA-RF CPPW 01-RF Open ended
Black C 3SE-RF C 3S-RF C 3S
White C 3SEW-RF C 3SW-RF C 3SW

Suspended Semi-Rigid Gooseneck Cardioid Condenser Microphone with short flexible shaft and knuckle joint.

  • Response optimised for consistent sound quality.
  • Unobtrusive slimline design.
  • Superior grade components.
  • Engineered in high quality brass.
  • Semi-Rigid Gooseneck shaft.
  • Includes PPA-RF.
  • Finish: Satin Black or White.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

C3SE-RF
Length 215mm (8.5")
Application Designed for ceiling mounting for use in conference halls, places of worship, board rooms..
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 69dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination Male 3 Pin XLR
Supplied Accessories W2 Foam windshield included
Finish Satin Black or White.
Dimensions 12mm (0.5")
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using a short flexible shaft ( 6mm diameter) with a knuckle joint allowing vertical adjustment. The microphone is fitted with an external phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The Phantom Power Adaptor includes filters which will eliminate all cellular frequencies (GSM/2G, 3G, 4G & 5G). A 25ft (7.5Metre) cable is connected and is terminated with a male 3 pin XLR. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Ceiling plate CP73 is available as an optional extra. Microphone length: 8.5in/215mm. Shaft diameter: 7mm. Finish: Satin Black or White.
C3S-RF (CPPW01-RF)
Length 215mm (8.5")
Application Designed for ceiling mounting for use in conference halls, places of worship, board rooms..
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 69dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination (CPPW01-RF) screw terminal to Open Ended, 2 Core + Screen.
Supplied Accessories W2 Foam windshield included
Finish Satin Black or White.
Dimensions 12mm (0.5")
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using a short flexible shaft ( 6mm diameter) with a knuckle joint allowing vertical adjustment. Including a 7.1 metre (25foot) bare ended 2 conductor plus a shield/ground cable. Frequency response 50 Hz - 18 KHz , sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Microphone length: 8.5in/215mm. Shaft diameter: 7mm. Finish: Satin Black or White.
C3S
Application Wideband cardioid condenser microphone designed to be suspended in places of worship, conference halls, theatres etc.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50Hz - 18 KHz
Sensitivity -37dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa)
Impedance 1.8 K Ohms
S/N Ratio 69dB(A)
Maximum Sound Pressure Level 125db at 1KHz 1% T.H.D.
Power Requirements 1.5 - 9 volts max through series resistor
Termination Open Ended 2 core + screen. No M10x1 Mounting
Supplied Accessories W2 foam windshield included
Finish Satin Black or White.
Dimensions 12mm (0.5") Head, 6mm (0.25" ) Flexible shaft
Weight 7.2/8.3oz
Architects and engineer specifications Back electret condenser microphone designed for suspended ceiling applications. The microphone has a short flexible shaft mounted on a knuckle which allows for easy vertical adjustment. Engineered in high quality brass. Terminated with a 7.5 Metre cable open ended the microphone requires phantom power supply 1.5 – 9 Volts. Frequency response 50 – 18 KHz, impedance 1.8 K Ohms, Max spl 125dB less than 1% THD, sensitivity -37dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa). Finish: Satin Black or White.