CRM 202S-RF

  

Dual element Boundary layer Microphone with Half Cardioid Polar Pattern.

Discontinued.

Polar Pattern Frequency Response
CRM 202SN-RF CRM 202SN-RF
CRM 202SN-RF
Black Nickel
CRM 202S-RF CRM 202SN-RF

Dual element boundary layer microphone with half cardioid polar pattern.

  • 'RF Friendly' technology offering immunity from GSM radio frequency interference.
  • Response optimised for consistent sound quality.
  • Low profile at surface level.
  • Each capsule have a half cardioid pattern that are 180° from each other, and can capture two participants on both sides of a table.
  • Touch sensitive switch with Bi-Coloured LED halo.
  • Superior grade components.
  • Engineered in high quality brass.
  • Integrated phantom power adaptor.
  • Open ended termination.
  • Finish: Black Nextel® or Satin Nickel.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

Technical
Length Below table 112mm / 4.41 ins
Application Designed for for use in conference halls, schools, colleges, board rooms..
Type Dual capsule, condenser (back electret)
Polar Pattern Half Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 69dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts Phantom Power
Termination Open ended + Touch switch ribbon cable terminated in RJ45.
Finish Black Nextel® or Satin Nickel
Dimensions Diameter 63mm (2.48")
Architects and engineer specifications Boundary layer twin capsule having half cardioid polar pattern. CRM 202S-RF has a built in mechanism allowing the microphone to disappear after use simply by pressing the top downwards until it locks in place. A touch sensitive switch with Bi coloured halo is incorporated into the top of the microphone allowing On/Off switching when used with a DSP or logic controlled box. The microphone is constructed from high quality brass construction and is fitted with a phantom power adaptor accepting 9 to 48 volts DC. Impedance of 200 Ohms. The phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Supplied with 2 x 2M (6.6ft) 2 core + screen cable with open ended termination. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Microphone length below table: 112mm/4.4 ins Above table: 2mm (0.08ins) Body diameter: 56.5mm (2.2 ins). Finish: Black Nextel® or Satin Nickel.