Fully flexible Cardioid Gooseneck Microphone / Semi-Rigid Gooseneck shaft / Rigid stem with knuckle joint Cardioid Microphone.

Full flex Semi rigid
Black White Black White
100mm (3.8") C 31 C 31W
200mm (7.8") C 32 C 32W C 32/SR
300mm (11.8") C 33 C 33W C 33/SR C 33W/SR
400mm (15.7") C 34 C 34W C 34/SR C 34W/SR
500mm (19.6") C 35 C 35/SR
600mm (23.6") C 36 C 36/SR

Black White Nickel
Knuckle joint 80mm (3.2") C 301 C 301W C 301N

Fully flexible Cardioid Gooseneck Microphone / Semi-Rigid Gooseneck shaft / Rigid stem with knuckle joint Cardioid Microphone.

  • Response optimised for consistent sound quality.
  • Unobtrusive slimline design.
  • Superior grade components.
  • Open Ended base mounting.
  • Engineered in high quality brass.
  • Fully flexible gooseneck shaft / Rigid stem with knuckle joint shaft.
  • Finish: Satin Black or White.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

C 31 - C 32 - C 33 - C 34 - C 35 - C 36
Length 100mm (3.8") / 200mm (7.8") / 300mm (11.8") / 400mm (15.7") / 500mm (19.6") / 600mm (23.6")
Application Designed for use in conference halls, places of worship, schools, broadcasting and paging systems.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50Hz - 18KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 1.8 K Ohms
S/N Ratio 69 dB(A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 1.5 - 9 volts max. through series resistor
Optimum Operating Requirements 6 volts
Termination Open ended 2 core + screen cable passing through M10 x 1 Thread with shake proof washer and nut
Wiring connections Red Phase + (Hot) White Phase - (cold) Screen ground
Supplied Accessories W2 Foam Windshield included
Finish Satin Black or White.
Dimensions DIA 8mm (0.32")
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using an 8mm flexible shaft terminated with 1 Metre of cable bare ended. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Shaft diameter: 8mm. Finish: Satin Black or White.
C 32/SR - C 33/SR - C 34/SR - C 35/SR - C 36/SR
Length 200mm (7.8") / 300mm (11.8") / 400mm (15.7") / 500mm (19.6") / 600mm (23.6")
Application Designed for use in conference halls, places of worship, schools broadcasting and paging systems.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50Hz - 18KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 1.8 K Ohms
S/N Ratio 69 dB(A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 1.5 - 9 volts max. through series resistor
Optimum Operating Requirements 6 volts
Termination Open ended 2 core + screen cable passing through M10 x 1 Thread with shake proof washer and nut
Wiring connections Red Phase + (Hot) White Phase - (cold) Screen ground
Supplied Accessories W2 Foam Windshield included
Finish Satin Black or White.
Dimensions DIA 8mm (0.32")
Weight 138gms (4.8oz)
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using an 8mm flexible shaft terminated with 1 Metre of cable bare ended. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Shaft diameter: 8mm. Finish: Satin Black or White.
C 301
Length 80mm (3.2")
Application Cardioid Condenser Microphones designed for use in conference halls, places of worship, broadcasting and paging systems.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 1.8K Ohms
S/N Ratio 69dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 1.5 - 9 volts max. through series resistor Optimum Voltage 6 volts
Termination Open ended 2 core + screen cable passing through M 10 x 1 thread with shakeproof washer and nut
Wiring connections Red Phase + (Hot) White Phase - (cold) Screen ground
Supplied Accessories W2 Foam windshield included
Finish Satin Black, White or Nickel.
Dimensions Head 12mm (0.48")
Weight 140 g (4.9oz)
Architects and engineer specifications The Electret condenser microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction and is fitted with a knuckle joint allowing horizontal rotation and vertical adjustment. Terminated with 1 Metre of cable open ended which requires a phantom power adaptor. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -37dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Shaft diameter: 12mm (0.48"). Finish: Satin Black, White or Nickel.