C 801 SERIES

  

Slim, mini shotgun, hypercardioid condenser microphone suitable forspeech in a wide range of pro and live sound applications including places of worship, conference and leisure centres, banks and financial trading centres. Fitted with a knuckle joint giving both lateral and vertical adjustment.

Open ended XLR-RF XLR-S-RF
Black C 801 C 801E-RF C 801ES-RF
White C 801W C 801EW-RF

Slim, mini shotgun, hypercardioid condenser microphone suitable for speech in a wide range of pro and live sound applications including places of worship, conference and leisure centres, banks and financial trading centres. Fitted with a knuckle joint giving both lateral and vertical adjustment.

  • Optimised for speech clarity
  • Knuckle joint fixing
  • Superior grade components
  • Finish: Satin Black or White.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

C801
Length 180mm (7.3")
Application Developed for speech purposes in a wide range of pro and live sound applications including places of worship, conference and leisure centres, banks and financial trading centres.
Type Condenser (back electret)
Polar Pattern Hyper-Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 1.8 K Ohms
S/N Ratio 69dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 1.5 - 9 volts max. through series resistor Optimum voltage 6 volts
Termination Open ended 2 core + screen cable passing through M 10 x 1 thread with shake proof washer and nut.
Wiring connections Red Phase +(Hot) White Phase -(cold) screen ground
Supplied Accessories W8 Foam windshield included
Finish Satin Black or White
Dimensions Head dia 12mm (0.5")
Weight 156 g (5.5oz)
Architects and engineer specifications The back electret condenser microphone has a Hyper-Cardioid polar pattern design optimised for speech. The microphone is made of solid brass terminated with 1m bare ended cable. The microphone is fitted with a knuckle joint allowing the capsule to rotate almost 360 degrees horizontally and 90 degrees vertically. Frequency response 50 Hz to 18 KHz; Sensitivity -37.0dB +/- 3dB @ 1KHz (0dB =1V/Pa);Impedance 1.8K Ohms. Total Harmonic Distortion (THD) at an operating level of 125dB is no greater than 1%, s/n ratio 69dB(A). A W8 foam windshield is included. Dimensions: L 180mm (7.3 ins). Shaft diameter: 12mm.Head diameter: 12mm. Finish: Satin Black or White.
C801E-RF
Length 262mm (10.3")
Application Developed for speech purposes in a wide range of pro and live sound applications including places of worship, conference and leisure centres, banks and financial trading centres.
Type Condenser (back electret)
Polar Pattern Hyper-Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -47dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination PPA adaptor - Male 3 pin XLR
Wiring connections Pin 1 - Ground Pin 2 - Phase + Pin 3 - Phase -
Supplied Accessories W8 Foam windshield included
Finish Satin Black or White
Dimensions Head dia 12mm (0.5")
Weight 156 g (5.5oz)
Architects and engineer specifications The back electret condenser microphone has a Hyper-Cardioid polar pattern design optimised for speech. The microphone is made of solid brass and is terminated with a male 3 Pin XLR plug. The microphone is fitted with a knuckle joint allowing the capsule to rotate almost 360 degrees horizontally and 90 degrees vertically. Inbuilt is an integral Phantom Power Adaptor that will accept 9 to 48 volts DC. The Phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Frequency response 50 Hz to 18 KHz; Sensitivity -47.0dB +/- 3dB @ 1KHz (0dB =1V/Pa);Impedance 200 Ohms. Total Harmonic Distortion (THD) at an operating level of 125dB is no greater than 1%, s/n ratio 64dB(A). A W8 foam windshield is included. Dimensions: L 262mm (10.3 ins). Shaft diameter: 8mm. Head diameter: 12mm. Finish: Satin Black or White.
C801ES-RF
Length 262mm (10.3")
Application Developed for speech purposes in a wide range of pro and live sound applications including places of worship, conference and leisure centres, banks and financial trading centres.
Type Condenser (back electret)
Polar Pattern Hyper Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity 47dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination PPA Adaptor-Male 3 Pin XLR
Wiring connections Pin 1 - Ground Pin 2 - Phase + Pin 3 - Phase -
Supplied Accessories W8 Foam windshield included
Finish Satin Black
Dimensions Shaft dia 8mm (0.32") Head dia 12mm (0.5")
Architects and engineer specifications The back electret condenser microphone has a Hyper-Cardioid polar pattern design optimised for speech. The microphone is made of solid brass and is terminated with a male 3 Pin XLR plug. The microphone is fitted with a knuckle joint allowing the capsule to rotate almost 360 degrees horizontally and 90 degrees vertically. The shotgun microphone is fitted with a magnetic slide reed switch to allow pop/click free muting of the microphone. Also included is an integral Phantom Power Adaptor that will accept 9 to 48 volts DC. The Phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Frequency response 50 Hz to 18 KHz; Sensitivity -47.0dB +/- 3dB @ 1KHz (0dB =1V/Pa), Impedance 200 Ohms, Total Harmonic Distortion (THD) at an operating level of 125dB is no greater than 1%, s/n ratio 64dB(A). A W8 foam wind shield is included. Dimensions: L 458 (18 ins). Shaft diameter: 8mm. Head diameter: 12mm. Finish: Satin Black.