C 3E-RF HALO SERIES

  

Full Flex & Semi-Rigid Gooseneck Cardioid Microphone fitted with high brightness LED Halo.

Full flex Semi-rigd
200mm (7.8") C 31E Halo-RF
300mm (11.8") C 32E Halo-RF C 32E/SR Halo-RF
400mm (15.75") C 33E Halo-RF C 33E/SR Halo-RF
500mm (19.7") C 34E Halo-RF C 34E/SR Halo-RF
600mm (23.6") C 35E Halo-RF C 35E/SR Halo-RF
700mm (27.5") C 36E Halo-RF C 36E/SR Halo-RF

Knuckle joint 199mm (7.83") C 301E Halo

Full Flex & Semi-Rigid Gooseneck Cardioid Microphone fitted with high brightness LED Halo.

  • Response optimised for consistent sound quality.
  • Unobtrusive slimline design.
  • Superior grade components.
  • Engineered in high quality brass.
  • Fully flexible Gooseneck shaft fitted with high brightness LED Halo.
  • Includes Phantom Power Adaptor.
  • Finish: Satin Black.
  • Also available in Nextel Suede Coating finishes (Custom Orders Only)

For 'Glossary of Terms' Click Here

C 31E Halo-RF - C 32E Halo-RF - C 33E Halo-RF - C 34E Halo-RF - C 35E Halo-RF - C 36E Halo-RF
Length 200mm (7.8") / 300mm (11.8") / 400mm (15.75") / 500mm (19.7") / 600mm (23.6") / 700mm (27.5")
Application Cardioid Condenser Microphones designed for use in conference halls, places of worship, broadcasting and paging systems. High brightness LED halo gives easy visual indication of person talking.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -40dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination Male 5 Pin XLR
Supplied Accessories W2 Foam windshield included
Finish Satin Black
Halo power requirements 12Vdc @ 30mA
Dimensions 8mm (0.32")
Weight 120 g (4.2oz)
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using either an 8 flexible shaft. The microphone is fitted with a phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz and is terminated with a male 5 pin XLR. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -40dB +/- 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. The microphone head includes an integral concentric Halo illuminated by high brightness LED’s drawing 30mA max at 12 Volts. The LED’s will require a separate 12 Volt DC power source. Shaft diameter: 8mm. Finish: Satin Black.
C 32E/SR Halo-RF - C 33E/SR Halo-RF - C 34E/SR Halo-RF - C 35E/SR Halo-RF - C 36E/SR Halo-RF
Length 300mm (11.8") / 400mm (15.75") / 500mm (19.7") / 600mm (23.6") / 700mm (27.5")
Application Cardioid Condenser Microphone designed for use in conference halls, places of worship, broadcasting and paging systems. High brightness LED halo gives easy visual indication of person talking.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -40dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination Male 5 Pin XLR
Supplied Accessories W2 Foam windshield included
Finish Satin Black
Halo power requirements 12Vdc @ 30mA
Dimensions DIA 8mm (0.32")
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction 8.5mm semi-rigid shaft. The microphone is fitted with a phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz and is terminated with a male 3 pin XLR. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -40dB ± 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. The microphone head includes an integral concentric Halo illuminated by high brightness LED’s drawing 30mA max at 12 Volts. The LED’s will require a separate 12 Volt DC power source. Shaft diameter: 8mm. Finish: Satin Black.
C 301E Halo
Length 199mm (7.83")
Application Cardioid Condenser Microphone designed for use in conference halls, places of worship, broadcasting and paging systems. High brightness LED halo gives easy visual indication of person talking.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity "-47dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination Male 5 Pin XLR
Supplied Accessories W2 Foam windshield included
Power Supply 12VDC required for LED
Finish Satin Black
Halo power requirements 12Vdc @ 30mA
Dimensions 0.48" (12mm) Head 0.34" (8.5mm)
Weight 140 g (4.9oz)
Architects and engineer specifications The Electret condenser microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction. The semi rigid shaft is fitted with a knuckle joint allowing the capsule to rotate almost 360 degrees horizontally and 90 degrees vertically. The microphone is fitted with a phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. Included is a switchable bass cut filter -4dB per octave @ 400Hz and -6dB per octave @ 100Hz and a switchable -10dB Pad with a fully balanced output and is terminated with a male 5 pin XLR. The microphone head includes an integral concentric Halo illuminated by high brightness LED’s drawing 30mA max at 12 Volts. The LED’s will require a separate 12 Volt DC power source. Frequency response 50 Hz - 18 KHz +/-3dB, sensitivity -47dB +/- 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. Finish: Satin Black.