SM 80TSX5-RGB

  • SM 80TSX5-RGB

Save as PDF

  

Through Table Microphone Shock Mount with Touch Switch and RGB

The SM 80TSX5-RGB is a low profile through table microphone shock mount complete with a capacitive touch switch and RGB light ring. With no moving parts, low-profile mounting and encapsulated electronics, SM 80TSX5-RGB provides multiple colours for clear and precise visual operational status. Comes with modular under desk mount TS-C1 controller for easy install and a shock mounted Audio XLR.

  • Brass construction Top and Flap.
  • A hinged flap allows the unit to be almost flush with the table.
  • Simple push fit XLR connector allows a microphone to be removed quickly and easily so that the table can be used for other matters.
  • Self-calibrating, low profile mount capacitive touch switch facilitating click / pop free switching of a microphone from DSP.
  • RGB LED provides multi-colour combination for clear precise visual status of microphone.
  • No moving parts and employing surface mount technology, ensures extreme reliability, longevity and trouble free use.
  • Operates in conjunction with the supplied touch switch controller (TS-C1) allows connection via CAT 5E patch cable back to CDT-100, CUI-2 or directly to DSP.
  • Fitted with 200mm cable that connects to TS-C1’s SWITCH port.
  • Programmable via DSP to operate in PTT, PTM or latching modes.
  • 12V DC operation using regulated power supply, CDT-100 or CUI-2
  • Finished in Satin Black

For 'Glossary of Terms'Click Here

SM 80TSX5-RGB
ApplicationBoardrooms, conferencing, court rooms, home office and other such venues.
TypeShock Mount microphone Base
Power RequirementsTS-C1: 12V dc @ 140mA
Gooseneck Halo 5 Pin as per microphone specification
Operating Temperature-10C to +60C
TerminationLight ring and switch: RJ 45 Plug, Audio: 5 pin XLR not cabled
FinishSatin Black
DimensionsHeight above surface: 3mm (0.18”)
Diameter: 58mm (2.28”)
Body Diameter: 50mm (1.97”)
Shock mount and XLR depth below surface: 60mm (2.36”)
Architects and engineer specificationsThe through table microphone mount shall have a brass top and hinged flap construction with an overall diameter of 58mm (2.28”). Once the microphone has been removed a hinged flap allows the unit to sit almost flush with the surface. It comes complete with a shock mounted 5 pin XLR and TS-C1. The Through Table shock mount base shall include an electronic touch switch with RGB to give clear precise visual status of operation. Touch switch has no moving parts. Requiring 12v DC @ 140mA. Finish: Satin Black